Showing all 30 results
- Male connector – Plugs into virtually any NMEA2000 network
- Female connector – Plugs into virtually any NMEA2000 network
- Correctly terminates at the end of a long cable run, without the need for an extra T
- Especially usefull up yacht masts, or on boats with limited space
- Expand your existing NMEA2000 network or construct a new one
- Plug and play with most other brands
- Isolates the power source of the NMEA2000 network but allows data to flow
- Used for installations where the engine is powering part of the network
- This right-angled cable can be used with any NMEA2000 system
- Ideal for use when there is limited space at the back of your display unit
- Extend your NMEA2000 backbone with our 2M backbone drop cable
- this cable can be used within any marine system using NMEA 2000
- Adapts from Yamaha outboards to Garmin 7400 / 8400 series units with a J1939 port
- Is not for NMEA2000 – Not suitable for echomap units.
- Extend your NMEA2000 backbone with our 6M backbone drop cable
- this cable can be used within any marine system using NMEA 2000
- Extend your NMEA2000 backbone with our 10M backbone drop cable
- this cable can be used within any marine system using NMEA2000
- Includes everything required to hook up a NMEA2000 sensor to your NMEA2000 compatible chartplotter
- Plug and play ease.
- Ensures bow orientation on your chartplotter matches your heading
- Heading accuracy of plus or minus 3 degrees
- Easy NMEA 2000® plug-and-play interface
- 9-axis MEMS technology allows installation in any orientation located away from magnetic interference
- Monitor your fuel flow and remaing fuel
- When connected to a Garmin chartplotter will give litres per NM, range and other usefull information
- The GFL 10 fluid level analog adapter allows you to change from analog to digital with your old gauges
- simple to install
- converts data from traditional analog gauges to a NMEA2000 signal
- Converts data between the Nexus network and NMEA 2000
- Provides compatibility between Nexus and Garmin products
- Simple plug-and-play installation between Nexus, NMEA 2000 and USB
- No user setup or system configuration required
- Allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks.
- Garmin speed/ temp thru hull sensor
- Connects directly to NMEA 2000 network
- Connects to all Garmin chartplotters with network capability
- Adapt existing rudder feedback to NMEA 2000
- Allows use of existing analogue system
- Use when installing Garmin pilots to convert existing rudder feedback
- Converts engine information from CANBUS (J1939) to NMEA2000
- Allows your chartplotter to display engine and fuel information
- Monitor older analog engines through NMEA2000
- Cheaper option than replacing old worn out guages
- Instrument display
- Connects and powered through NMEA2000 network
- Displays all NMEA connected infomation
- Install at any location to view data at any time
- 3 bladed propeller provides true wind speed in lighter air
- twin fin design allows for a stable true wind angle
- great performance at low wind speeds
- easy plug and play between Nexus, Garmin chartplotters, NMEA 2000 and USB
- Heading, Rate Of Turn (ROT), roll, and pitch output over NMEA 2000
- Accurate and reliable solid-state sensor technology
- Easily adjustable mounting bracket allows bulkhead or up-mast installation
- IPX7 waterproof
- Wireless Wind system
- No running long connecting cables
- Easy to install
- Designed for racing sailboats
- 1 metre straight pole above the mast, removes turbulence errors from sail wash
- Easy plug and play between Nexus, Garmin chartplotters, NMEA 2000 and USB
- 3 bladed propeller provides true wind speed at low wind speeds
NMEA2000 Terminating Resistor Male
$29.00
BUY NOWNMEA2000 Terminating Resistor Female
$29.00
BUY NOWGarmin NMEA2000 Inline Terminator
$34.00
BUY NOWGarmin gWind Replacement Battery
Replacement rechargable battery for Garmin gWind and Nexus wind gear.
More Info...$35.00
BUY NOWGarmin NMEA 2000 T
$45.00
BUY NOWGarmin NMEA2000 Power Isolator
$45.00
BUY NOWGarmin NMEA2000 Cable Right Angle, 1.8M
$55.00
BUY NOWGarmin NMEA2000 Cable, 2M
$55.00
BUY NOWGarmin J1939 to Yamaha Engine Bus Adapter Cable
$55.00
BUY NOWGarmin NMEA2000 Cable, 6M
$65.00
BUY NOWGarmin NMEA 2000 Field-installable Connector – Male
Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backboneRead More…
More Info...$65.00
BUY NOWGarmin NMEA 2000 Field-installable Connector – Female
Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backboneRead More…
More Info...$65.00
BUY NOWGarmin NMEA2000 Cable,10M
$75.00
BUY NOWNMEA 2000 Starter Pack – Navico
NMEA 2000 starter pack which will fit all NMEA 2000 systems including Simrad, Lowrance, Garmin.
More Info...$94.95
BUY NOW$99.00
BUY NOWNMEA 2000 Starter Pack – Garmin
$189.00
BUY NOWGarmin SteadyCast Heading Sensor
$267.98
BUY NOWGarmin GFS 10 Fuel sensor
$369.00
BUY NOWGarmin GFL10 Tank Level To NMEA2000 Adapter
$369.00
BUY NOWGarmin GND10 Nexus to NMEA2000 Adapter
$379.00
BUY NOWGarmin GST 43
$389.00
BUY NOWGarmin GRA 10 rudder adaptor cable
$407.00
BUY NOWAirmar DST810 Smart Transducer
This plastic thru-hull NMEA 2000 smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data.
More Info...$649.00
BUY NOWMaretron J2K100 CANBUS Converter
$939.00
BUY NOWActisense EMU-1 Analog Engine to NMEA2000
$997.56
BUY NOWGarmin GMI 20 Instrument display
$999.00
BUY NOWGarmin gWind Wired Complete
$1,099.00
BUY NOWPrecision-9 Compass
$1,099.00
BUY NOWGarmin gWind Wireless 2 Transducer
$1,299.00
BUY NOWGarmin gWind Race complete
$2,399.00
BUY NOW