Garmin B265LH CHIRP Transducer



You may also like…


This transducer comes with either bare wires or with the Garmin 12 pin plug. The bare wires are used for the Garmin GSD26, Furuno DFF1UHD or Simrad BSM3, while the Garmin 12 Pin connector is used with the GPSMAP 8400 series, such as the GPSMAP 8410xsv.

These Chirp thru hull transducers are a perfect match for the outstanding chirp sonar incorporated in the Garmin Gpsmap8400 series. Customers are easily getting in excess of 800m with them and with clear fish returns down to 500m  covers all your blunose/hapuku fishing requirements. Correctly installed will still work at 20kn+. as the fairing block supplied with works well at speed.


Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fishfinder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fi sh separation at all depths.

The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, CHIRP Broadband Transducer Technology.

You may also like…