Airmar TM265LH CHIRP Transducer (Furuno or Garmin)


Shipping 21 Days

$2,299.00 $2,199.00

You may also like…


The Airmar TM265LH fits CHIRP sounder modules which take bare wires – eg: Garmin GSD26 or Furuno DFF1-UHD. In some cases has the right connector ie: 12 pin Garmin which connectos directly to the display.

If going into the Garmin 7400 series with the 12-pin connection you get both high and low CHIRP. If going into an 8-pin adapter block, you will only be able to use either low or high CHIRP.

Note: These usually come in either bare-wire, or Garmin 12-pin. We can usually adapt any brand of plug onto the end of the cable at extra cost. Please get in touch if you would like a specific plug wired in.


Rely on Airmar’s new broadband transducers for the ultimate fishing mission! Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town. Traditional marine fishfinders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers.

In contrast, CHIRP uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fishfinder.

Transom mounted, the TM265-LH CHIRPS across the following bandwidths: LH Model – Low Frequency 42-65 kHz, High Frequency 130-210 kHz


  • Low frequency: 42-65 kHz (25° to 16° beamwidth)
  • High frequency: 130-210 kHz (10° to 6° beamwidth)
  • 8 Internal Broadband Ceramics
  • Depth & fast response water temperature sensor
  • Urethane housing and stainless steel mounting bracket
  • Hull type: Fiberglass, Wood, Metal
  • Can retrofit to existing TM258 & TM260 bracket
  • Hull Deadrise: Up to 28°
  • Acoustic Window: Urethane
  • Weight: 4 kg (8.9 lb)

You may also like…