Garmin GMR Fantom 4 Radar





These radars are great for those looking for a performance and feature packed radar. Being solid state, you no longer need to wait for your radar to warm up before use, as is the case with magnetron based radars. The MotionScope technology uses what’s known as the Doppler effect to identify and mark targets that are moving toward/away from you which is an awesome feature that will improve safety and situational awareness for every boatie.


Garmin GMR Fantom 4 Radar

Garmin’s 4-foot, 40W solid state GMR Fantom radar features MotionScope technology, which utilises the Doppler effect to identify and highlight moving targets to help you avoid potential collisions. The Fantom 4 is designed to fully integrate with selected Garmin chartplotters.

With the high-power 40W output you get superb close range and short range target detection, ranging from as close as 20 feet to as far as 72 nautical miles, even in rain or fog. The 1.25 degree horizontal beamwidth provides a high-resolution image and high antenna gain meaning its easy to pick out targets at a distance. The result is a radar that paints a clear, consise image of the shoreline, other vessels and impending weather – right on your Garmin chartplotter. With the Garmin Fantom radars you get consistant target positions, excellent target separation and reliable operation. The 8-bit true colour imagery helps you to discriminate large targets from small targets and enhances target seperation. The radar data can overlaid onto your charts (heading sensor recommended).

The GMR Fantom solid state means low power consumption, an instant turn on and zero delay to warm up as with traditional magnetron radars. Set the rotation speed to 24rpm for reduced power consumption, or 48rpm to provide fast screen updates.

These radars use the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the motion of the target. This allows for instant detection of any targets moving toward, or away from the radar. MotionScope highlights the moving targets in different colors on the radar display so you can navigate around other boats or severe weather, or toward fishing spots where birds are feeding at the surface.

MARPA Target Tracking

Target Size


In The Box:
• GMR Fantom 4
• Mounting hardware kit and template
• Power cable (15 meters)
• Network cable (15 meters)
• Software update microSD/SD™ card
• Documentation





Physical & Performance

Maximum range 72 nm
Radar type Open-Array
Physical dimensions Pedestal: 16.6″ x 14.3″ x 10.7″ (42.1 x 36.4 x 27.1 cm)

Full assembly: 15.9″ height x 51.8″ diameter (40.3 cm height x 131.4 cm diameter)

Transmit power 40 W
Power consumption Typical 55 W; Max 160 W
Beam width 1.8° horizontal, 23° vertical
Power input 10-32 V
Antenna length 48″ (121.92 cm)
Rotation speed (RPM) 24 and 48 rpm (High Speed only available in Single Range mode, with MotionScope disabled, and on range settings of 12 NM or lower)
Minimum range 6 meters
Water rating IPX6
Weight Array: 11.4 lb (5.2 kg)

pedestal: 34.7 lb (15.7 kg)


Guard zone alarm Yes
Dual range support Yes
Dynamic Auto Gain Dynamic
Radar overlay support Yes
Color 8 bit
  • MotionScope: Yes
  • Auto Bird Gain: Yes
  • Dual Radar Support: Yes
  • Echo Trails: Yes
  • Programmable Antenna Parking Position: Yes
  • Max Wind Speed: 80 kt
No Transmit Zone Yes
Timed Transmit Yes
High definition (outstanding target separation with less screen clutter) Yes
Dynamic Sea Filter Dynamic
MARPA target tracking (collision avoidance) Yes (Requires Heading Sensor, Sold Separately)