Kiss Counterpoise for SSB

USUALLY IN STOCK WITH SUPPLIER

USUALLY SHIPS IN: 2-3 DAYS

$275.00

GRAHAMS THOUGHTS...

This Patented SSB ground plane system “KISS-SSB” is by far the easiest to install, and works just as good or better as the copper foil/bonding system. 

It comprises of a four foot lead that attaches to the “ground / counterpoise lug” on your tuner and then you just stretch out the remaining 10 feet of 1″ diameter tubing that encloses the array of specific lengths of radiating copper wires. It is just that simple, run it along the hull, behind a cushion, in the cabinets, in the lazerett, etc. If you can not run it straight it is just fine to make sweeping turns, even a sweeping U-Turn is OK.

This is way better than having to use thru hull fittings or the keel. And you can pull out all that corroding unsightly copper foil that runs thru the boat.

Description

KISS-SSB GROUND PLANE

 


The KISS-SSB is a self-contained counterpoise radial ground system that is the perfect answer for trouble free Marine SSB communications. The word “GROUND” could be the problem it should be “COUNTERPOISE” The system of using exact pre-measured counterpoise ground radials is even suggested in every Icom, SGC Smart Tuner, and Furuno Auto-Tuner manuals. Right now the most commonly used tuner is the Icom-AT-140 and if you look on page two you’ll see the principals used in our KISS-SSB Ground Plane System.  Using the lifelines, engine, tanks and other metal is the most common cause of RF interference and static, and it can upset other electronics.