Garmin Striker Plus 4

Currently Out Of Stock!


You may also like…


When the striker range first came out we were very impressed with the value for money – for about the cost of a small fish finder the striker also included GPS tracking – so you could make waypoints and view your snail trail on a basic background. Plus the fish finder was pretty good too!

There’s really only one big change with the Striker 4 Plus compared with it’s predecessor – the addition of the quickdraw contours software. This works really well to make your own, extremely accurate charts, especially for lake work. HOWEVER – do bear in mind the striker 4 and striker 5 models doesn’t have any way of saving this information for backup. So when the unit eventually dies, the quickdraw information goes too. The bigger striker models have Wifi


The Striker Plus 4 is a fishfinder with a bright 4.3” display and built-in GPS. It features a CHIRP sounder and Quickdraw Contours map drawing software. So although it doesn’t have any pre loaded charts, you can draw your own charts of fishing areas. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed and direction

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. Striker Plus 4 can now internally store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.

CHIRP Sonar Clarity

The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.

GPS Fishfinder

The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip.

GPS also allows Striker Plus 4 to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.

Built for You

The Striker Plus 4 fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.


Physical dimensions 3.9” x 6.9” x 1.8” (9.8 x 17.4 x 4.5 cm)
Weight 0.7 lbs (0.3 kg)
Water rating IPX7
Display type QSVGA
Display resolution 272 X 480 pixels

Sonar Features & Specifications

Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported Traditional: 50/77/83/200 kHz
Transmit power 200 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph

Fishfinder Features

Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included


  • Quickdraw Contours
  • Integrated GPS
  • Mark Waypoints
  • Course over Ground (COG)
  • Current draw @ 12V: 0.23A

You may also like…